Sanyo S1 manual Answering Calls

Answering Calls

To answer an incoming call:

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press or to answer an incoming call.

Your phone notifies you of incoming calls in the following ways:

⬤The phone rings and/or vibrates.

⬤The LED flashes.

⬤The backlight illuminates.

⬤The screen displays an incoming call message.

⬤If available, the phone number of the caller is displayed.

⬤If the phone number is in your Contacts, the Contacts entry’s name is displayed.

The following options are also displayed by pressing Options (right softkey).

⬤Answer to answer the call.

⬤Answer:Speaker to answer the call in speakerphone mode.

⬤Select Audio to switch the call to your desired device (if available).

⬤Answer on Hold to put the call on hold. (See “Setting Answer on Hold” on the next page.)

⬤Screen Call to answer the call by using pre-recorded announcement. (See “Setting Up Screen Call” on page 80.)

⬤Quiet Ringer to mute the ringer. (This feature appears when the ringer is set.)

Tip: Your phone offers additional ways to answer calls. (See page 42 for "Setting Any Key Answer" and for "Auto Answer Mode".)

13