Making a 10-4 Call (Group Call)
You can make a 10-4 call to all members in a Group entry,which
you have in your 10-4 List.You can communicate with up to five
members at a time.
1. Press (left softkey)or to access the 10-4 List.
2. Press (left softke y), and select the list from which you
want to make a Group call (Company Grps.or Personal Grps.)
and press .
3. Highlight the group entry you want to call,and press and hold
to place the call and take the floor.(You will see
10-4 calling...and Connecting... followed by “You have floor.”
Continue with the 10-4 call as described previously.)
䡲To make a 10-4 call to a group member,select your
desired group,highlight your desired group member,and
press and hold .
䡲If one of the group members takes the floor,you will see
the member’s name and 10-4 number on the display.
4. When the call is finished,press .
Tip:The phone beeps if you press when another party has the floor.
You can also make a Group Call after checking the group member.
Press to display group members, highlight <Call Group> and
press and hold during step 3 above.
To redial your last 10-4 call, highlight Redialand press from the
10-4 List.
Making a 10-4 Call by Entering a Number
1. From standby mode,enter the 10-4 number you want to dial.
2. Press to place the 10-4 call.
3. Continue with the 10-4 call,pressing and holding to
speak and releasing it to allow other parties to reply.
4. When the call is finished,press .
– or –
1. Press (left softkey)or to access the 10-4 List.
2. Press (left softkey)> Enter 10-4#.
Go to
10-4
Go to
10-4
85