Correcting Backlight
CENT (BLC SETTING) (Center-weighted Metering) (continued)
3To correct areas other than center, select from | 4Specify a metering level (0 – 15). | ||
the options. |
|
|
|
|
| BLC WINDOW WEIGHTING | |
BLC WINDOW WEIGHTING | TOP | 0 | |
|
| ||
TOP | 0 | BOTTOM | 0 |
LEFT | 0 | ||
BOTTOM | 0 | RIGHT | 0 |
LEFT | 0 | CENTER[FIX] | 15 |
RIGHT | 0 |
|
|
CENTER[FIX] | 15 | PRESET | OFF |
|
| ||
|
| MENU | BACK |
PRESET | OFF | |
MENU |
| BACK |
| (When TOP is selected) | |
TOP | : Upper |
|
BOTTOM | : Lower |
|
LEFT | : Left |
|
RIGHT | : Right |
|
CENTER | : Area set in step 2. | |
•Selected area will be highlighted.
(When TOP is selected)
•The “CENTER” is fixed to 15 (max).
•The light intensity for the area specified in “15” will be recognized as the same level as that of the “CENTER”.
•The light intensity specified with 0 (zero) will not be metered.
•Repeat steps 3 and 4 as required.
•The respective area varies depending on the setting (position and size of CENTER) you configured in steps 1 and 2 .
Note: The position and size specified for each area are common to those used for MOTION MASKING setting. (See page 38)
5Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal monitoring screen.
•If you want to return to the previous screen, select “BACK” and press the SET button.
Settings/ | Adjustments |
English 24