Adjusting White Balance

 

 

AWC SETTING (One-Push Adjustment)

 

 

 

1Select “AWC LOCK” – “SET”.

■ To perform fine adjustment of color

 

 

In the “AWC SETTING” screen, select “GO TO MWB” – “SET”, and

 

 

press the SET button.

AWC SETTING

 

AWC LOCK

SET

GO TO MWB

SET

R“SET” blinks.

2Point a camera to a white paper or wall to project an image on the whole screen, and press the SET button.

White paper or wall

RThe “MWB SETTING” screen appears. Specify values manually. (See page 37)

MEMO: Transferring to the “MWB SETTING” through “GO TO MWB”, white balance mode (see page 34) will be changed to “MWB”.

3Set “MENU” to “END” and press the SET button.

RFinishes the settings screen and returns to the normal monitoring screen.

•If you want to return to the previous screen, select “BACK” and press the SET button.

SET

RThe blinking of “SET” stops and illuminates, and white balance adjustment will start. The adjustment will end after about 2 seconds when the blinking of “SET” restarts.

•If the adjustment does not yield a satisfactory result, press the SET button again.

Settings/

Adjustments

English 36