Hiding Partial Image (Privacy Protection)
PRIVACY MASK SETTING (continued)
3Locate the upper left corner of an area for which | • From the datum point at the upper left corner of the area, the | |
|
| |
| you want to mask, and then press the SET | size can be scaled up or down, as well as side to side. |
| RThe “PRESET” and “MENU” appear on the screen. | |
| button. | |
| To repeat a masking setting, select “MENU” and “BACK” and | |
|
| |
| MASK 1 SET | press the SET button, and then repeat steps from 2 to 4. |
|
|
[POSITION]
SET
SET
RThe “SIZE” screen appears.
MEMO: Here, determine the upper left position of the masking area.
Pressing the button further when the right end or the bottom end of the displayed area hits an edge will scale down the area size, but you can set your preferred size in step 4.
4Specify the masking size and press the SET button.
MASK 1 SET
[SIZE]
SET
SET
MEMO: If you return to the masking setting screen using “BACK”, the specified mask number will be specified with “ON”. If you want to change the setting, specify “OFF”. And if you want to change the previously specified masking position and size, select “SET” and then press the SET button to establish a new setting.
MEMO: You can specify up to 8 maskings on the screen.
(Example: 4 maskings)
MASK 1 2
3 4
5Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal monitoring screen.
•If you want to return to the previous screen, select “BACK” and press the SET button.
51English