Sanyo VCC-WD8575P D/N SETTING-B/W(Black and white), maximum value of gain for AGC*1, 1Select “AGC MAX GAIN” and specify the, 3Set “MENU” to “END” and press the SET button

Adjusting DAY/NIGHT Function

D/N SETTING-B/W (Black and white)

1Select “AGC MAX GAIN” and specify the			■ GAIN SETTING
	maximum value of gain for AGC*1.		Select “OFF” and press the SET button, and you can specify a value
			for the fixed gain. (0 – 7)
	D/N SETTING - B/W
			GAIN SETTING
	AGC MAX GAIN	NORM
	BURST	OFF
			7

	PRESET	OFF
	MENU	BACK
OFF	: Fixed gain setting
NORM	: Normal setting
MID	: Setting with which a bright image is obtained in a lower
	illuminance than the NORM setting.
HIGH	: Setting with which a bright image is obtained in a lower
	illuminance than the MID setting.

•For a dark subject, select MID or HIGH.

*1 AGC (Auto Gain Control) is a funciton to adjust automatically the gain of the Video signal from the camera so that an optimum signal level is obtained accroding to brightness of the object.

•The greater the number, the higher the sensitivity becomes in dark places.

Note: Selecting the “OFF” option invalidates the “SENSE UP” settings. (See page 28)

2Set “BURST” to “ON” or “OFF” for the burst signal*2.

*2 The burst signals are color synchronization signals required for reproducing color. You should select “ON” in case where you observe any disturbance of picture caused by switching from color to black and white mode of a monitor, in particular when peripheral devices such as a switcher unit are connected.

3Set “MENU” to “END” and press the SET button.

RFinishes the settings screen and returns to the normal monitoring screen.

•If you want to return to the previous screen, select “BACK” and press the SET button.

33English