Sanyo VCC-WD8575P ATW MASKING (Masking for ATW), Adjusting White Balance, 1Select an area to be masked and specify “ON”, 2Set “MENU” to “END” and press the SET button

Adjusting White Balance

ATW MASKING (Masking for ATW)

1Select an area to be masked and specify “ON”.			2Set “MENU” to “END” and press the SET button.
				RFinishes the settings screen and returns to the normal
	ATW MASKING			monitoring screen.
	TOP	OFF		• If you want to return to the previous screen, select “BACK” and
				press the SET button.
	BOTTOM	OFF
	LEFT	OFF
	RIGHT	OFF
	CENTER	OFF
	PRESET	OFF
	MENU	BACK

TOP

LEFT CENTER RIGHT

BOTTOM

RMasking will be applied for the area specified with “ON”.

•You can specify multiple masks. Repeat the above steps as required.

•To disable the mask, select the area and specify “OFF”.

MEMO: • You can get an appropriate white balance by masking an extremely bright light source or dark location.

[Settings Screen] [Monitor Screen]

•While setting the area, the masking is shown but is not visible on the monitor screen.

35English