Installing Lens
You are recommended to use any DC type and CS mounting lens equipped with an auto iris.
Note:
•Apply adapter ring (sold separately) when you use any C mounting lens.
• Use any lens of which length (L: see the figure to the right) of the mounting screw is within 5 mm; otherwise you may fail to
install or damage the lens.
L
Steps for Installing Lens
Remove the lens mounting cap. | Install the lens. | |
|
|
|
2
Plug
11 Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.
2Connect the plug to the Lens Iris Output Terminal (LENS).
If the plug does not fit into the terminal, replace it with the proper type.
Switching Over Type of Auto Iris Lens (DC type is selected by default.)
Remove the side cover. | Select a lens type by using the | Attach the side cover. |
| switch (A.I. LENS). |
|
|
| For VIDEO type lens |
Connection
|
|
|
|
| DC type |
|
|
|
|
| Any lens without amplifier |
|
|
|
|
| circuit (also referred to as |
|
|
| A. I. |
| |
|
|
| LENS |
| “Coil lens” or “Without |
Cover |
|
|
|
| |
|
| DC | |||
|
| EE amplifier”). | |||
|
| VIDEO | |||
|
|
| |||
Loosen screw with a |
|
|
| VIDEO type | |
Phillips screwdriver. |
|
|
|
| Any lens with amplifier circuit |
|
|
|
| ||
|
|
|
|
| (also referred to as |
| Inside the cover | ||||
| EE amplifier”). | ||||
Adjust the iris by using LEVEL dial on the lens side.
(This unit has fixed ALC. Adjusting the ALC on the lens does not take effect.)
English 8