Sanyo VCC-WD8575P Using Alarm Input Terminal as DAY/NIGHT Switching, 1Set “MODE” to “COLOR”, Set “MENU” to “END” and press the SET button

Specifying Alarm Input

Using Alarm Input Terminal as DAY/NIGHT Switching

1Set “MODE” to “COLOR”.

ALARM IN SETTING

MODE	COLOR
POLARITY	NO
MOTION	OFF
MOTION SET	SET
ZOOM	OFF
ZOOM TIME	5S
PRESET	OFF
MENU	BACK

MEMO: Specify this option when you want the switching between COLOR and B/W mode to be made by any external sensor or switch through the alarm input, independent on the ambient brightness.

Note: • You must specify “COLOR” for the “DAY/NIGHT” mode to enable this setting. (See page 32)

•The setting will take effect after you exit the settings screen.

•You can select either “OFF” or “OR” alone for “MOTION” setting. (See page 41)

2Select “POLARITY” and specify a polarity for the signal.

POLARITY	Between ALARM	Mode
	IN and COM
Setting
	Terminals
NO	Open	COLOR
	Close	B/W
NC	Open	B/W
	Close	COLOR

NO: Normal Open (When closed, switches from COLOR to B/W.)

NC : Normal Close (When opened, switches from COLOR to B/W.)

MEMO: For other settings, see pages 38 – 43.

3Set “MENU” to “END” and press the SET button.

RFinishes the settings screen and returns to the normal monitoring screen.

•If you want to return to the previous screen, select “BACK” and press the SET button.

43English