Sanyo VCC-WD8575P GSet “TEST” to “ON”, HSet “MENU” to “BACK” and press the SET button, 6Select “SENSITIVITY” – “SET” and press the SET button

6Select “SENSITIVITY” – “SET” and press the SET button.

MOTION SETTING

MASKING
SENSITIVITY	SET
DURATION	5S
	SET
PRESET	OFF
MENU	BACK

RThe “SENSITIVITY” screen appears.

7Select “MOVE” and specify a sensitivity level (1 – 10).

SENSITIVITY
MOVE	ú	5
Y-DIFFER	ú	5
Y-LEVEL	ú	5
TIME	ú	1

TEST	OFF	SET
PRESET	OFF
MENU	BACK

RThe greater the number, the lower the responsiveness to movement becomes.

Specifying Alarm Input

8Select “Y-DIFFER” and specify a luminance difference level (1 – 10).

•The greater the number, the lower the responsiveness to the brightness variation, such as lighting on or off conditions.

9Select “Y-LEVEL” and specify a luminance level (1 – 10).

•If false alarms occur very frequently because of noise in dark screens, increase the value.

FSelect “TIME” and specify a detection time of duration (1 – 60).

•The greater the number, the lower the detectability against fast-moving subjects.

GSet “TEST” to “ON”.

•You can test the sensitivity of the motion detection. When any motion is detected, the character color will turn into red on the screen.

HSet “MENU” to “BACK” and press the SET button.

RReturns to the “MOTION SETTING” screen.

Settings/ Adjustments

English 40