Operation and Configuration
Adjusting printing for Non-separate labels
When printing on a continuous label roll (non- separate), if you tear off a label at the wrong place, proceed as follows.
1.Interrupt printing on the computer, or by pressing the PRINT key in the ONLINE state to take the printer OFFLINE. (STATUS LED goes off).
2.Press the FEED button to feed a label. When the feeding stops, tear off the label correctly by pulling the label in the direction of the arrow shown in the diagram. The label is now aligned properly for printing to resume.
3.Press the PRINT button to return to the online state (STATUS LED lights green). You can now resume the print job.
