Operation and Configuration
3-16
Printer modes (cont’d)
Online Command Compatibili ty Mode
The printer can be set for compatibility with SBPL
commands or with the older MB200 commands.
You can check the current setting with a test printout
as described in “Performing a Test Print” on page2.
When setting the online command compatibility
options, the STATUS LED blinks green, and turns
into a steady green signal upon completion of setting.
Turn off the printer ONLY when the STATUS LED is a
steady green light.
Setting Online C ommand compatib ility
(cover must be left open)
Compatibility DSW-1 DSW-2 DSW-3 DSW-4 Other keys
MB200
online commands ON ON ON ON hold down PRINT
button
SBPL
online commands ON ON ON ON hold down FEED
button
MB20xi A6.book Page 16 Friday, May 27, 2005 5:12 PM