Micrologic™ 2.0A, 3.0A, 5.0A, and 6.0A Electronic Trip Units | |
Appendix | Rev. 01, 07/2012 |
|
|
Appendix A—Register List
ENGLISH
List of Registers
The quantities are listed in alphabetical order according to the SMS topic name.
NOTE: A system scan rate of 500 ms or greater is recommended to minimize communications timeout issues.
This is an abbreviated list of registers. For a complete list of registers, contact your local sales office.
To access available registers, the following address scheme applies.
Module | Module Name | Equation | Address Range |
|
|
|
|
BCM | Circuit Breaker Communication Module | ||
|
|
|
|
CCM | Cradle Communication Module | BCM + 50 | |
|
|
|
|
PM | Protection Module (Internal to trip unit) | BCM + 100 | |
|
|
|
|
MM | Meter Module (Internal to trip unit) | BCM + 200 | |
|
|
|
|
Table 10: | Register List |
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
SMS Topic Name | User Description | Number of | Register* | Module*† | Units | Scale/Bitmask | ||
Registers* | ||||||||
|
|
|
|
|
|
| ||
810DBrkrStatus |
| Circuit Breaker Status | 1 | 661 | BCM |
| Bit 0; ON = closed, OFF = open | |
810DBrkrTripStat | Circuit Breaker Trip Unit Status | 1 | 661 | BCM |
| Bit 2; ON = tripped, OFF = not tripped | ||
|
|
|
|
|
|
|
| |
BCM_SN |
| BCM Serial Number | 4 | 516 | BCM |
| ASCII text | |
|
|
|
|
|
|
| Bit 8 = disconnected | |
BkrPos |
| Circuit Breaker Position | 1 | 661 | CCM |
| Bit 9 = connected | |
|
|
|
|
|
|
| Bit 10 = test position | |
|
|
|
|
|
|
|
| |
DT_3Regs |
| Device Clock Date/Time | 3 | 679 | BCM |
| ||
EnableCloseBkr |
| Remote Closing Enabled | 1 | 669 | BCM |
| Bit 2; ON = enabled, OFF = not enabled | |
|
|
|
|
|
|
|
| |
EnableOpenBkr |
| Remote Opening Enabled | 1 | 669 | BCM |
| Bit 1; ON = enabled, OFF = not enabled | |
EnableRemCtrl |
| Remote Control Enabled | 1 | 669 | BCM |
| Bit 3; ON = auto (enabled), | |
|
| OFF = manual (not enabled) | ||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
IA |
| Current A | 1 | 8821 | PM | A | Unity | |
IA_PCT |
| Current A % Load | 1 | 8837 | PM | % | Unity | |
|
|
|
|
|
|
|
| |
IB |
| Current B | 1 | 8822 | PM | A | Unity | |
IB_PCT |
| Current B % Load | 1 | 8838 | PM | % | Unity | |
|
|
|
|
|
|
|
| |
IC |
| Current C | 1 | 8823 | PM | A | Unity | |
IC_PCT |
| Current C % Load | 1 | 8839 | PM | % | Unity | |
|
|
|
|
|
|
|
| |
IG |
| Current G | 1 | 8825 | PM | A | Unity | |
IG_PCT |
| Current G % Load | 1 | 8841 | PM | % | Unity | |
|
|
|
|
|
|
|
| |
IG_PCT_VIGI |
| Current G (VIGI) % Load | 1 | 8842 | PM | % | Hundredths | |
IG_VIGI |
| Current G (VIGI) | 1 | 8826 | PM | A | Thousandths | |
|
|
|
|
|
|
|
| |
IMax |
| Current Max Present | 1 | 8820 | PM | A | Unity | |
IN |
| Current N | 1 | 8824 | PM | A | Unity | |
|
|
|
|
|
|
|
| |
IN_PCT |
| Current N % Load | 1 | 8840 | PM | % | Unity | |
LDPUValue |
| Long Delay Pickup Value | 2 | 8756 | PM | A | Modulo 10,000 format** | |
MaxIA |
| Max Current A | 1 | 8827 | PM | A | Unity | |
MaxIB |
| Max Current B | 1 | 8828 | PM | A | Unity | |
|
|
|
|
|
|
|
| |
MaxIC |
| Max Current C | 1 | 8829 | PM | A | Unity | |
MaxIG |
| Max Current G | 1 | 8831 | PM | A | Unity | |
|
|
|
|
|
|
|
| |
MaxIG_VIGI |
| Max Current G (VIGI) | 1 | 8832 | PM | A | Thousandths | |
MaxIN |
| Max Current N | 1 | 8830 | PM | A | Unity | |
|
|
|
|
|
|
|
| |
NominalCurrent |
| Circuit Breaker Nominal Current | 1 | 8750 | PM | A | Unity | |
ReadyToClose |
| Circuit Breaker Ready to Close | 1 | 661 | BCM |
| Bit 5; ON = yes, OFF = no | |
|
|
|
|
|
|
|
| |
Continued on next page
| © |
