Schneider Electric 2.0A Zone-Selective Interlocking ZSI, ZSI Combinations, Jumpered Terminals

48049-136-05	Micrologic™ 2.0A, 3.0A, 5.0A, and 6.0A Electronic Trip Units
Rev. 01, 07/2012	Section 3—Operation

Zone-Selective Interlocking (ZSI) Table 8: ZSI Combinations

The number of devices which can be interlocked are shown in Table 8.

	Upstream Device	UnitsTrip#.0xMicrologic	UnitsTripBSeriesMicrologicDSquare	RelayFault-Ground100-GCDSquare ProtectionEquipmentfor	RelayFault-Ground200-GCDSquarefor ProtectionEquipment	UnitsTripSTR58GerinMerlin	TripUSRCMandUSRCPioneerFederalUnits
	(receives input from RIM)
	Downstream Device
	(sends output to RIM)
Micrologic #.0x Trip Units		15	R	R	15	15	R
Square D Micrologic Series B Trip Units		R	26	R	R	R	15
Square D GC-100 Ground-Fault Relay		R	R	7	R	R	R
for Equipment Protection
Square D GC-200 Ground-Fault Relay		15	R	R	15	15	R
for Equipment Protection
Merlin Gerin STR58 Trip Units		15	R	R	15	15	R
Merlin Gerin STR53 Trip Units		15	R	R	15	15	R
Federal Pioneer USRC and USRCM Trip		R	15	R	R	R	15
Units
Square D Add-On Ground Fault Module		R	5	R	R	R	R
for Equipment Protection

R—RIM module is required to restrain any devices.

Numerical References—Maximum number of upstream circuit breakers which can be restrained without requiring a RIM Module.

ENGLISH

Circuit breaker terminals are shipped with terminals Z3, Z4 and Z5 jumpered to self- restrain the short-time and ground-fault functions. Remove the jumpers when activating zone-selective interlocking.

Figure 33: Jumpered Terminals

UC1

Z5 M1

Z3 Z4

Z1 Z2

Auxiliary Connections

© 1999–2012 Schneider Electric All Rights Reserved 23-EN