Schneider Electric and 6.0A Communication Module values, Wire circuit breakers for zone-selective

Micrologic™ 2.0A, 3.0A, 5.0A, and 6.0A Electronic Trip Units	48049-136-05
Section 3—Operation	Rev. 01, 07/2012

Wire circuit breakers for zone-selective	Figure 34: ZSI Wiring Example
interlocking.

ENGLISH

UC1

Z5 M1

Z3 Z4

Z1 Z2

Auxiliary

Connections 1

Secondary
Connector
Position	Description
Z1	ZSI out signal
Z2	ZSI out
Z3	ZSI in signal
Z4	ZSI in short time
Z5	ZSI in ground fault

UC1

Z5 M1

Z3 Z4

Z1 Z2

Auxiliary Connections 2

UC1

Z5 M1

Z3 Z4

Z1 Z2

Auxiliary Connections 3

Communication Module values

If the optional circuit breaker communication module (BCM) is installed, use the ammeter to set communication module values.

To access the communication module menu:

1.Current menu is displayed.

2.Simultaneously press both menu button and scroll button down for three seconds.

3.Communication module addressing menu will appear.

Figure 35: Access Communication Module Menu

Current Menu	33067107			Communications Address
06133354		menu	06133703

A

100 % 100 %

24-EN © 1999–2012 Schneider Electric All Rights Reserved