Schneider Electric Class 615 Cable Operating Handle, Flange-mounted, Handle Cable, Mechanism

Compact® NSF and NSJ 150 to 600 A Circuit Breakers

Section 9—Accessories

CABLE OPERATING HANDLE

The extended rotary operating handle is Listed under UL file E103955 and Certified under CSA file LR 69561.

06153108

O

O

FF

Flange-mounted	• The cable operator maintains:
Handle Cable	—	Suitability for isolation
Operating	—	Indication of three positions: O (Off), I (On) and tripped
Mechanism	—	Access to push-to-test
	• The circuit breaker may be locked in the off position by one to three padlocks, padlock shackle
	diameter 0.19–0.31 in. (5–8 mm); padlocks are not supplied
	• Door can be locked closed due to interlocking features of handle operator
Installation	Handle is mounted on flange of enclosure using specified mounting dimensions while circuit breaker
	and operating mechanism are mounted to inside of enclosure using two screws.

Cable lengths available in 3-, 5- or 10-foot lengths to accommodate a variety of mounting locations. Handles are available in painted Nema 1, 3, 3R, 4 (sheet steel) and 12 ratings or chrome (Nema 4, 4x).

© 1995–2003 Schneider Electric All Rights Reserved 35