Scientific Atlanta D9225 $YDLODEOH6HUYLFHVPHQX, «$Erxwvxevfulehuvhuylfhv, Available Services

Available Services
$YDLODEOH￿6HUYLFHV￿PHQX
Information ab ut	lable sat llite broadcast services and the current setup is
available from the	ilable	menu. These services are authorized through

y ur de ler/r sell r or local service provider. The current setup is also affected by

ToStepy urdisplayLNB12..DisplayMoveantthetonnathe(dish)MinMenubleinstallation(FigurmnuÖand.e5)press.SELECT.

Available options: Move to Exit and press SELECT (or press 1 and then SELECT) to return to the previous menu.

You can view information bout the current setup, and/or change the current channel. The following available satellite broadcast services information is dis-

playedVBICONTROLLSDataAudioVideoon(PID)-(PID)screen(PID)!(control￿.pinsstatus)

DownloadChannel(current(PID)channelnumber) âEncryptAuthorizationScrambling(status)(status)

1Packet ID

2Low Speed Data

3Vertical Blanking Interval

Figure16.AvailableServicesmenudisplay

«$ERXW￿VXEVFULEHU￿VHUYLFHV

Subscriber uplink services made available to your Headend Satellite Receiver are associated with virtual channels. These channels can include video, audio and/or data services. All authorized virtual channel services are provided via PowerVu System software and broadcast facility equipment, and are decoded by the receiver using the current receiver setup. You can view available subscriber services infor- mation independently (i.e., for each virtual channel) at the Available Services menu. If subscriber services are deauthorized, or if available services exclude one or more virtual channels, an on-screen message is substituted for the virtual chan- nel display and the Authorized field displays “No” to indicate that no uplink service authorization key is being received.

If EXPANSION PORT control pins are being used for remote receiver operation via Remote Control commands, the status of each pin is displayed at the Control field￿￿. For example, if all four control pins are set to the open collector state (i.e., High), the Control field displays “HHHH”. For more information about the EXPANSION PORT, see “Connecting your system” (see also “Appendix C Serial Remote Con- trol Command Set”).