Scientific Atlanta D9225 manual

Once activated, the receiver begins searching for a signal associated with any Net- work ID. When a possible match is found, the search is temporarily interrupted

whileFindthesignalÖreceiver attempts to synchronize with the found signal. If synchroniza- display ONñactivating

ti is successful, the “Lock, Sig“ status is displayed on-screen, and the settings can be saved, as required before exiting to video (current channel). If receiver syn hro-

nization c ot take place, the signal is carded and the signal search is auto-

matically resumed. If no signal is found, the signal search ntinues ind finitely, and must be manually te minated (see l o “¼About the Search o tion” and

ToStep“…About12..aSELECTWhen(availableMoveAthepopSignal-toupsignal(orFidmenuoptiopressState”)aisndisplaysfoundpssa1reand.ON(ìthenELECT)Lock,SaveSELECTandOFF)optionsigìtostatusdisplay),... movetoExitthesignalandpresssearch Step3.Pressrequired1to.savethenewsetting(YES),orfollowtheon-screeninstructions,as

Available options: Press 1 to save the new settings (Yes), or press 2 to discard all changes (No), or press 3 to cancel the operation (Cancel).

Repeat this action to search for (i.e., Find) another signal. When the settings are saved, the Find option is automatically set to OFF. You can also terminate the search manually by setting the Find option to OFF.

￿￿