CME1356R and CME1656R
Additional Maintenance: Water Distributors
It may become necessary to remove the water distributors from the top of the evaporator and clean
1.Remove front panels.
2.Push and release the OFF button.
3.Remove the evaporator covers.
4.Pull the tab at the front of the evaporators forward and lift the water distributors up until they clear the tab.
distributors in or with a solution of Scotsman Ice Machine Cleaner and warm potable water.
10.Return the water distributors to their normal installed position.
11.Push and release the clean button to flush the water system.
12.After the machine stops, push and release the Freeze button.
13.Replace the evaporator covers.
Check That Water Channels
Are Clear
Water 
Distributors
5.Repeat for all evaporators and distributors..
6.Slide the left and right groups of distributors forward until the center manifold is accessible.
7.Remove the distributors from the manifolds.
Manifold
8.Examine the top of the evaporators. The Water Distribution Channels must be free from mineral build up. If build up is evident, scrub the channels with Scotsman Ice Machine Cleaner and a plastic bristle brush.
9.Examine the water distributors. Although they are made of a material that is resistant to mineral build up, some may be present. Soak or scrub the
14. Replace the front panel.
Insert Bottom Tabs in 5th Slot
of Cube Deflectors
May 2001
Page 28
