You can press Enter button to display “Input Your Password Please” menu again, then entering the PIN code, or press ,,or button move cursor to “Cancel” and press Enter button to close up this menu.

Using the “Change Password” item 1 When enter the “V-Chip” menu, select “Change Password”.

2 Press or button to highlight the “Change Password” item.

3 Press Enter button to confirm.

4 Press Number buttons (0~9) to enter the 4-digit PIN code to change the password, then use button move to Confirm item, enter the 4-digit PIN code again.

5Press Enter button to confirm.

Note:Please operate “Change Password” at the first time.

Using the “V-Chip Enable” item 1 When enter the “V-Chip” menu,

select “V-Chip Enable”.

2 Press or button to highlight the “V-Chip Enable” item.

3 Press or button to select “On” or “Off”.

On: The V-Chip setting functions are activate.

Off: The V-Chip setting functions are not activate.

4Press Menu or Exit button to return.

Using the “Block MPAA Rating” item

1 When enter the “V-Chip” menu,

select “Block MPAA Rating”.

2 Press or button to highlight the “Block MPAA Rating” item.

3 Press Enter button to confirm.

4 Press or button to select an item, then press Enter button to lock (display“”) or unlock (display “”).

29

Page 30
Image 30
Scott LCT37SHA manual Press  or  button to highlight the Change Password item