Scott LCT37SHA manual Using “Color Temperature”, Using “Auto Setting”, Using “Phase”

Operating Instructions

■ Using “Color Temperature”

1 Press Menu button, and then press  or  button until the “Geometric” menu appears.

2 Press  or  button to highlight the item.

3Press  or  button to select one

of “Cool”, “Middle”, “Warm” or “User” for the balance of back light.

4 Press Menu or Exit button to return.

If you select the item of “User”, a status bar below comes up for you to adjust the color temperature to you desirable value.

■ Using “Auto Setting”

1 Press Menu button, and then press  or  button until the “Geometric” menu appears.

2 Press  or  button to highlight the item.

3 Press Enter button to confirm.

4 Press Menu or Exit button to return.

Note: This item will auto-adjust the picture display.

■Using “Phase”

1 Press Menu button, and then press

or  button until the “Geometric”

menu appears.

2 Press  or  button to highlight the item.

3 Press  or  button to adjust.

4Press Menu or Exit button to return.

38