Scott LCT37SHA manual Selection of “Blue Back”, Using “Default”, Operating Instructions

Operating Instructions

4Select “Off” to close this function.

5Press Enter button to confirm your selection.

Hot keys:

-You can also press CCD button on the remote control to select.

■Selection of “Blue Back”

1Press Menu button, and then press

 or  button until the “Setup” menu appears.

2 Press  or  button to highlight the item.

3 Press  or  button to choose “On” or “Off”, when select “On” to set screen to a pleasant blue background when it detects no signal available if turn on.

4Press Menu or Exit button to return.

■Using “Default”

1Press Menu button, and then press

 or  button until the “Setup” menu appears.

2 Press  or  button to highlight the item.

3Press Enter button to confirm, it will reset to restore factory default settings.

When display “Make sure set

Default?” Menu, you can press  or  button move cursor to “OK”, then Press “Enter” button. After that, a confirmation message will pop up.

Note: Just reset the items in the setup menu don’t include the protected-items (Needs pin code enter, such as password) and properties such as skipped channel, channel name.

34