DAILY PROGRAM
(MONDAY-SUNDAY)
Torecord aprogram at the same timeon the same chan-
nel every day, follow steps [1] to[5] on page 19,then
step [6a] below.
Select item 2(DAILY) with
number buttons. I_ILYPROGAAIO _]
1_O3RAM MJtaBER I
IENOTIME __1_:._ -
TAPE SPEED --
OATE --I--
Continue with step [7] on page 20 onwards.
WEEKLY PROGRAM
To record aprogram atthe sametime on the same chan-
nel every week, follow steps [I] to [5] on page19, then
step [6b] below.
Select item 3(WEEKLY) _o,,_E'...... E.,,,"_'_-._._ :
TAPE SPEED --
with number buttons. _TE .....
Continue with step [7]on page 20onwards.
CHECKING TIMER PROGRAMSTo check aprogram that is to be recorded using the
Automatic Timer Program when the VCR is inthe
timer-record mode:
1) Turn on the TV and set the TV channel to the same
video output channel located on the back of the
VCR. (CH 3 or 4)
2) Press POWER/TIMER REC button so that the
"@" indicator disappears from the display.
3) Press the TV/VCR button so that "VCR" appears
on the display.
4) Follow instructions in steps [2] to [5] on page 19.
Information which was set for programming will
now appear.
TO STOP RECORDINGPress STOPbutton on the VCR.
•If you are recording using the Automatic Timer Pro-
gram, you may not operate the unit manually, but,
you may still stop the recording by pressing
STOP/EJECT button on the VCR.
NOTE: STOP button on the remote control will not
function in the Automatic Timer Recording mode.
TO CORRECT OR CANCELA PROGRAM•Press ADD/DELETE button to go back one step
from current step during steps [5]~[14].
• If you finished setting program, repeat steps [2] to
[4] onpage 19. Then press SELECT button repeat-
edly until your desired digit flashes and reset pro-
gram.
• You may cancel the entire program by pressing
ADD/DELETE button at step [5].
AUTOMATIC TIMER RECORDINGHINTS• If there a power failure or the VCR is unplugged for
more than 3 seconds, the clock setting andall timer
settings are lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape
and the VCRpower will be turned off.The "[]" in-
dicator will flash.
• If a tape is notinserted or theerase-protection tab is
removed, the "@" indicator flashes and automatic
timer recording cannot occur. Insert a tape that al-
lows recording.
• The TV that is connected toyour VCR may be turned
ON or OFF when the VCR is in the timer-record mode.
-21 - EN
***'if* 5CI6