QUICK SET PROGRAM
You may set the VCR to start and end recording
PROGRAM button on the VCR. It is easy for you
one program within 24 hours by simply pressing QUICK SET to set the timer for recording today's TV program.
*VCR power must be on to set Quick Set Program.
•Clock must be set to the correct time before setting the timer.
•Quick Set Program controls program number 8.
In the example below, the Quick Set Program is being set to record (current time is 6:00PM):
SETTING | TIME | from | 9:30PM | to | 11:00PM | |
CHANNEL |
| CH61 |
|
| ||
TAPE | SPEED | LP |
|
|
| |
NOTE: | This | function | cannot | be done | by | the remote control. |
Insert a cassette tape with its safety tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin
recording.) | L_" | 0:130:00 | _" I |
The VCR display will |
| 33 |
change to the count mode.
Set the channel number. Press CHANNEL • or • button repeatedly or hold it down until your desired
p_ mWEO s C1_ ___
channel number is dis- E_o 1l:13O- G played.
Press | QUICK SET PRO- |
|
ProgramGRAM buttonnumberon | It.l_ s (. | |
pears | on the display. | _ , |
7rq
Set the tape speed.
your desired | tape speed is | l |
[displayedPress SPEED.. | button until | _° " t°" ' |
Set the desired start time.
edly or hold it down until
Press START button repeat- [ i ,_ your desired start time is dis- L _8 (-
played.
Set the desired end time. Press END button repeat-
edly or hold it down until your desired end time is dis-
played.
- "_°'' ,_
. _:3D _€- 33 J
-I 1:013,,r 37
•The tape speed can be changed at any step from [2] to 15].
GRAM button to return to J'_ O:OD:DtJCN original mode.
Press POWER/TIMER REC button to set Quick Set Program.
This turns the VCR power |
|
|
|
off, and the "1_" indicator | ,_ | _o | |
lights up on the display. The | L |
| 8:os.. |
program number "8" is dis- |
|
|
|
played with current time. |
|
|
|
- 22 - | EN |
5CI6 |
