SETTING THE REMAINING TIME
You can set the remaining tape running time of your tape.
•If your cassette tape length is T- 130 or less, select "~T 130". For example, the popular T- 120 cassette tape calls for the "~Ti 30" selection. If your cassette tape is
NOTES:
•VCR Power must be on.
•Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH 3 or 4)
•Press the TV/VCR button so that "VCR" appears on the display.
•You must use remote control for this procedure.
FT1
Press MENU button. Select
item 2(VCR SET UP) with number buttons.
Select
111MER PROGRAMMING
VCR SET UP
3 INITIALIZE
MENU]
TAPE SELECT~T1 REPEAT PLAY
RENTAL
i ........ t
REMAINING TAPE RUNNING TIME DISPLAY
• Since the reel diameter and tape thickness are not |
common to all cassettes, the time count differs from |
cassette to cassette. Use the time display as an infor- |
mative number only. |
• During recording, the remaining tape running time |
is estimated based on the current recording mode |
(SP, LP, SLP). |
• During playback the remaining tape running time is |
calculated based on the current playback mode. |
• Remain time will not appear on TV screen while in |
the Fast forward or Rewind Mode. |
Press MENU button to re- turn to normal mode.
To check | the | remain | time, | /'_'Y" | 1 |
press SELECT | button | on the | / |
| |
remote control unit until RE- |
|
| |||
MAIN | appears on | TV |
|
| |
screen. |
|
|
| ,o REM _,,N .... | T,30 |
Notes: |
|
|
|
|
|
•In the Remain Time Mode calculating will start when the cassette tape is inserted and PLAY button is pressed.
While calculating, the TV screen shows as illus- trated.
•A video cassette must be inserted in the VCR for this function to work.
• There will be a delay of up to | 1 minute before the |
remain time appears on the TV | display. |
Note:
The use of the following tapes will result in difference between the displayed remaining time and actual time to the end of the tape:
•Tape housed in a
•Shorter tape length such as a
•
Hours, 40 Minutes at the start point of the tape in SP mode.
- 27 - | EN |
**€__r_ 5B24
