INDEX SEARCH
This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode.
•The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR.
•The index mark is not recorded if the PAUSE/STILL button is pressed and released during recording.
•The time gap between making the index marks on the tape should be greater than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording.
NOTES:
•VCR Power must be on.
•Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH 3 or 4)
•Press the TV/VCR button so that "VCR" appears on the display.
•You must use remote control for this procedure.
Example: You are watching program number 4 and want to fast forward to program number 7. You must skip three programs.
CURRENT PLAYBACK PROGRAM
II
I P,o.I p,o.=I ,,o.3_ Pro.51P,o.IePro.71
4 | 3 | 2 | 1 | 1 | 2 | 3 |
INDEX MARK
Press INDEX SEARCH but- ton. Index Search mode ap- pears on the TV screen.
Press the number button cor- responding to the number of programs that you want to
skip.
To correct the Index num-
ber, press DELETE button and re-enter the correct
number.
Press REWIND or F.FWD button. The VCR begins re- winding or fast forwarding then goes into playback mode at the beginning of de- sired program.
INDIE_I_ARCH
•J' u
When the preset program is reached, normal playback will start.
Notes:
•Index search can be set up to 20.
•This function is not operative in recording mode.
•Procedures must be followed within 30 seconds,
from steps [1] to [2]. Otherwise the Index Search mode will be cancelled.
•A video cassette must be inserted in the VCR for this function to work.
•Press STOP button on the VCR or remote control unit to exit the Index Search mode.
Note: Every time an index signal is skipped, the num- ber in the program indicator decreases by one.
- 24 - | EN |
• r_gc_r it 5B24
