Introduction

default is selected in the line below Policy, which means that the settings you are going to configure now will be valid under your default filtering policy. So, leave this selection as it is.

Otherwise, you could select a different filtering policy, using the drop-down list provided here.

c.Enable Advertising Filters. To do this, mark the checkbox next to the inscription.

You need to do this because all features that are placed under this main feature (like the Animation Filter) will only work if it is enabled.

d.From the tabs provided for configuring the Advertising Filters op- tions, select the Settings tab:

The Animation Filter section is located on this tab:

2.Configure settings

a.Enable the feature. To do this, mark the checkbox next to the section heading.

b.Check the radio button labeled Remove all animated images.

Note: To get help information on these settings, click on the question mark in the top right corner of the section.

The section should now look like this:

1–6