Home

Spam False Negatives Feedback Queue

The Spam False Negatives Feedback Queue section looks like this:

Using this section, you can configure the sending of feedback in order to improve the spam filter.

You can send e-mails that have erroneously not been classified as spam to an address that is configured in this section. After e-mails with this address have been received in the inbound queue of your Webwasher instance, they will be moved from there to the false negatives queue and later be sent to Secure Computing.

This feature is not enabled by default. If you would like to help improve the spam filter, please mark the checkbox next to the section heading.

After specifying this setting and other settings of this section, click on Apply Changes to make these settings effective.

Use the following items to configure the false negatives feedback:

•SMTP queue to use

From this drop-down list, select an e-mail queue. After being received in the inbound queue, an e-mail with the address specified further below will be moved to this queue as false negative and later be sent to Secure Computing.

The queue should be used for no other purpose than that of collecting false negatives since it will be cleared after e-mails have been sent off.

To see the e-mails that are in this queue, click on the See Content of Queue link next to the drop-down list.

•Send interval in . . . minutes

In the input field provided here, enter a time interval (in minutes) to specify the time that is to elapse between sending e-mails.

The default interval is 240 minutes. Entering 0 here means that no e-mails will be sent automatically.

2–27