Common
To add an object to the white list, use the area labeled:
•Add new entry
Select String or International Domain Name from the first of the drop- down lists provided here.
In the input field next to it, enter a string to specify the object using shell expressions.
To specify the object type, select Web,
You can further specify the object type by selecting a value from the drop- down list to the right. So, e. g. for Embedded Object you can further specify Any Type, ActiveX or Link.
Furthermore, use the following items when adding a new entry to the list:
—Description
Input in this field is optional. You may enter a description of the media type here.
—Disable
In the list of filters provided here, specify those that you want to exclude the object in question from. To do this mark the corresponding check- boxes.
If you would, e. g., like to allow
—Add to White List
After specifying the information for an object, click on this button to add it to the list.
This addition will be valid only under the policy you are currently con- figuring.
To add an object to the white list for all policies, mark the checkbox labeled Add to all policies before clicking on the button.
The White List is displayed at the bottom of this section.
To display only a particular number of list entries at a time, type this number in the input field labeled Number of entries per page and enter it using the Enter key of your keyboard.
If the number of entries is higher than this number, the remaining entries are shown on successive pages. A page indicator is then displayed, where you can select a particular page by clicking on the appropriate arrow symbols.