Common

Use the following items to configure the Welcome Page options:

Show once a day at . . .

To let the Welcome Page appear only once a day, make sure the radio button provided here is checked and enter the time of appearance in the input field.

Use the 24-hours format to enter a time (1 p. m. = 13:00).

Show each . . . minutes

To let the Welcome Page appear after a particular time interval has elapsed, check the radio button provided here and enter the time interval (in minutes) in the input field.

Opt out

If this checkbox is marked, the Welcome Page will not appear in sessions of the user who configured this setting.

Manipulate User History

The Manipulate User History section looks like this:

Using this section, you can configure options for the Welcome Page with regard to an individual user. You can configure that the Welcome Page is displayed to this user or not. If it is displayed, the options of appearance configured in the Welcome Page Options section above apply.

After specifying the appropriate settings, click on Apply Changes to make them effective.

Use the following items to configure Welcome Page options for an individual user:

User identifier

In this input field, enter information to identify the user. This can either be the IP address of the user’s system or the authenticated user name.

The Welcome Page will then be displayed to this user or not, depending on which of the two buttons described below you click on.

3–75