INDICATOR LIGHTS
When only the green power lamp is lit, the printer is working properly.
When a printer error occurs, a light will indicate what problem has occurred, as explained below.
When turning on the unit for the first time after purchasing, the ink lamp blinks rapidly because print heads and ink tanks are not attached yet. The lamp will go out when the initial setup completes.
...... | lit | ......blinking | fast blinking | extinguished (lamp is off) | |
| Light condition | Problem and Solution | |||
Ink | Power | Paper | |||
|
| ||||
Paper tray is empty, or a paper jam has occurred.
Load more paper or remove the jammed paper and press the paper button.
No ink, or a print head is not installed.
Change the ink tank, or install a print head.
Front cover is open.
Close the front cover.
The printer is warming up, or receiving data.
Please wait.
The carriage is not operating normally, or some errors may have occurred inside the printer.
If any paper is jammed, remove the jammed paper, and then press the "Paper" button. If no paper is jammed, press the "Paper" button to cancel the error warning. If the lights are still blinking even after trying to cancel the error, disconnect the power plug from the printer, and then insert it again.
If your printer still does not work, please contact your authorised SHARP service centre.
For more details on solving a problem, refer to the "Troubleshooting" section of the Online Manual.
SETTING UP THE PRINTER
13
