APPENDIX
This chapter shows specifications of the printer, supplies, and how to store the supplies.
SPECIFICATIONS OF THE PRINTER
Name |
| ||
Type |
| On demand, thermal inkjet type | |
Resolution |
| Max. 2400dpi x 1200dpi | |
Printing speed*1 | Monochrome | 17.0ppm | |
Colour | 10.0ppm | ||
| |||
Paper | Width | Max. 215.9mm (8.5") Min. 76.2mm (3") | |
Length *2 | Max. 355.6mm (14") Min. 127mm (5") | ||
| |||
Void area | Min. | Top 3mm, Bottom 3mm, Left 3mm, Right 3mm | |
Recommendation | Top 19mm, Bottom 19mm, Left 10mm, Right 10mm | ||
| |||
Print description | language | Host based printing system | |
Interface |
| ||
| USB interface (B type) | ||
|
| ||
Paper tray | Paper tray*3 | Max. 150 sheets of plain paper*5 | |
Output tray*4 | Max. 50 sheets of plain paper*5 | ||
capacity | |||
| Bypass tray | 1 sheet | |
Ink life*6 | Black | 400 sheets (700 sheets with the optional | |
Colour | 350 sheets | ||
| |||
External dimensions | (W x D x H) | 476mm x 374mm x 191mm (18.7" x 14.7" x 7.5") | |
Weight |
| 6.15kg (13.5lbs.) | |
Power supply*7 |
| Local voltage (±10%) | |
Power | Idle | 9.5W | |
consumption | Printing | Max. 30.0W | |
Operation | Temperature | 10°C - 35°C (50°F - 95°F) | |
condition | Relative humidity | 20% - 85% | |
Storage condition | Temperature | ||
Relative humidity | 20% - 85% | ||
|
| Sound Power Level LWA (1B=10dB) | |
|
| Printing: 5.5[B], Print mode: Normal, | |
|
| Standby: Background noise level | |
Noise level |
| Sound Pressure Level LPA (bystander positions) | |
|
| Printing: 45[dB(A)], Print mode: Normal, | |
|
| Standby: Background noise level | |
|
| Noise emission measurement in accordance with ISO 7779. | |
Emission Concentration | Dust: less than 0.075mg/m3 | ||
(measurement according to | |||
| |||
*1When printing SHARP original data with draft mode.
*2For the Bypass Tray, the maximum paper size is
*3Holds up to total thickness of 15mm paper stack.
*4Holds up to total thickness of 5mm paper stack.
*5With 75g/m2 (20lbs.) plain paper.
*6When using 20.3cm x 25.4cm (8"x 10") size paper at 5% image area in normal usage.
*7For this printer's power supply requirement, see the name plate located on the back of the printer.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
48
