31
SETTING UP FOR
Windows
INSTALLING THE PRINTER DRIVER
Installing onto Windows 2000
1Make sure that the printer is connected to your computer.
2Turn on the printer, and then turn on your computer.
On this step, "Found New Hardware Wizard" window will appear.
3Click the "Cancel" button.
4Insert the supplied CD-ROM into your CD-ROM drive.
5Double-click "My Computer" ( ), and then double-click the CD-
ROM ( ) icon.
6Double-click the "SETUP" ( ) icon.
7Check if the appropriate language has been selected, and then
click the "OK" button.
Normally, the correct language is selected automatically .
If this window does not appear, ensure to connect the printer a nd your computer.
If the window does not appear while the printer and your computer is securel y
connected by USB cable, refer to "Failed to Install the Printer Driver (Windows
2000)" in "Troubleshooting" of the online manual.
Make sure to click the "Cancel" button. If you continue installati on without clicking
the "Cancel" button, you may not install the driver suc cessfully.