Sharp AJ-2200 appendix Insert the supplied CD-ROM into your CD-ROM drive

On Windows NT 4.0, the screen will not appear. Go on to the next step.

Make sure to click the "Cancel" button. If you continue installation without clicking the "Cancel" button, you may not install the driver successfully.

Turn on the printer, and then turn on your computer.

1

2

3 If "Add New Hardware Wizard", "Update Device Driver Wizard", "New Hardware Found" or "Found New Hardware Wizard" window appear, click the "Cancel" button.

Make sure that the printer is connected to your computer.

INSTALLING THE PRINTER DRIVER

Installing onto Windows Me/98/95/NT4.0 (Parallel interface)

The screen images in this section are those of Windows Me.

4	Insert the supplied CD-ROM into your CD-ROM drive.
5	Double-click "My Computer" ( ), and then double-click the CD-
	ROM ( ) icon.
6	Double-click the "Setup" ( ) icon.
7	Check if the appropriate language has been selected, and then
	click the "OK" button.

Normally, the correct language is selected automatically.

34