PART NAMES AND FUNCTIONS
The following illustration lists the part names and function. Before operating, it is advisable to familiarise yourself with the printer.
The illustration below shows the printer with all the parts installed.
Front Side
Front cover
Open this cover to change the ink tanks or print heads.
Paper tray
Adjustable to suit a variety of paper sizes.
Ink lamp
The light blinks when the ink is empty, or the ink tank is not inserted correctly.
Power lamp
The indicator is lit when the printer is ready to print.
*If the printer has been kept idle for more than 20 minutes, the power will go off and so will the power lamp.
The printer can be restarted when the power button is pressed, or any print job is sent from your computer.
Paper lamp
The light blinks when the printer is out of paper, or a paper jam has occurred.
Output tray
The document is deposited onto the tray after printing. Extend the tray when printing long documents.
Power button
Press to turn the printer on or off.
Paper button
Press this button after rectifying a paper jam or paper empty condition. Depressing the button for a few seconds will activate the test print.
Paper knob
When printing onto an envelope or thick paper, adjust the knob to 
setting. (Return the knob to its original setting after printing.)
SETTING UP THE PRINTER
Internal Part
Black print head
Applies ink to the paper.
Print head latch
Secures the print head into position for operation.
Colour print head
Applies ink to the paper.
Cyan ink tank Yellow ink tank Magenta ink tank
Black ink tank
Carriage
7
