"Paper" Menu Settings (part 2)
Printer Properties
Paper Selection
Select "Tray" or "Bypass" for your print job.
Tray
Paper is fed to the printer from the paper tray.
If the "Tray" is selected from this menu and paper is placed in the bypass tray, the paper in the bypass tray will be fed first, and then paper will be fed from the paper tray.
Bypass
Paper will be fed to the printer from the bypass tray. Only one sheet can be loaded into the bypass tray. To load paper into the bypass, place the paper into the tray against the guide and press the paper button.
When printing one page:
Load paper into the bypass then start printing from your computer. If paper is not loaded before printing is started, the paper lamp on the printer will blink and the message "Out of paper on bypass" will appear on the screen of the computer.
When printing more than one page:
Repeat as above for each page.
Make sure to insert "Banner Letter" and "Banner A4" through the bypass tray. Max. 5 sheets of banner paper can be set to the bypass tray. Make sure that your application supports Banners when you intend to print onto Banners.
Media Type
Select the type of paper to be used. Select from "Plain", "Coated", "Photo", "Transparency",
For more information on various paper types, refer to the following table.
Media Type | Description | Media Usage |
Plain | Normal office paper | Corporate documents |
| (copier paper and high |
|
| quality paper) |
|
|
|
|
Coated | The print side of coated | Graphics, Images |
| paper is whiter. |
|
|
|
|
Photo | The print side of photo paper | Photographs |
| is glossy. |
|
|
|
|
Transparency | Overhead presentation on | Overhead |
| clear film. The print side of | presentations |
| transparency film is rougher. |
|
|
|
|
This media is to be | ||
| transferred to cloth materials |
|
| by an iron. |
|
|
|
|
Card Stock | Thick plain paper | Card printing |
|
|
|
!Be sure to use only Sharp recommended OHP films when you select "Transparency".
!If you select
!When "Card Stock" is selected, be sure to turn the paper knob to () direction to feed the thicker card stock.
|
|
|
|
|
|
|
| 10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
How to Use the |
|
| Printer Properties |
| Maintenance | Troubleshooting | |||
Online Manual |
|
|
| ||||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|