Paper Jam

Troubleshooting

If a paper jam occurs, refer to the steps below to remove the paper.

When paper is jammed, the paper lamp will blink fast.

1

Open the jam cover located on the rear of the

2

Take off the output tray to remove the jammed

printer to remove the jammed paper.

paper.

Gently pull the jammed paper upward by holding both edges of the paper.

If you cannot remove the jammed paper from the jam cover, refer to the next step.

 

After removing the jammed paper, be sure to align the

 

paper guide to the paper in the paper tray.

 

 

3

Close the jam cover, insert the output tray and

press the paper button.

Make sure the paper lamp is not blinking.

If the jammed paper will not come out easily, try pulling in the opposite direction. Do not pull too hard as this may damage the printer mechanism. Do not re-use any sheets of paper that have jammed.

 

 

 

 

 

 

 

 

44

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How to Use the

 

 

Printer Properties

 

Print

Maintenance

Troubleshooting

Online Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 46
Image 46
Sharp AJ2000 manual Paper Jam, Close the jam cover, insert the output tray, Press the paper button