Changing the Print Head part | Sharp AJ2000 specification

Changing the Print Head (part 1)

Maintenance

If print quality is poor, after cleaning the print head 5 times, the print head may be worn.

Ensure the printer is turned on before following the steps below on how to change the print head.

1	Open the front cover.	2	Raise the print head latch.
	The carriage will automatically move to the center position.		Raise the latch until it comes to a complete halt.

Raise this lever.

Do not put your hands into the printer until the carriage stops at the center position. Doing so may hurt your hands. Do not try to move the carriage manually by force, you may damage the printer.

								35


How to Use the			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual

Image 37

Sharp AJ2000 manual Changing the Print Head part, Open the front cover Raise the print head latch

Contents

Page Contents How to Use the Online Manual How to Use the Online Manual Outline of the Printer Driver Copies Printer Driver Functions Make additional changes Paper Settings Dialog Box part Custom Paper Paper Size Zoom% Orientation Main Menu Settings part Order Up Printing ReferenceGuaranteed area and printable area Paper Menu Settings part Media Type Paper Selection Output Paper Guaranteed area and printable area Draft Advanced Menu Settings ColorSync Output Quality Dialog Box Watermark Menu Settings part Edit Fonts button Text About button Version Menu Settings Remaining ink indicator window Maintenance Dialog Box Print Printing Overview Select Chooser from the Apple menu Close the Chooser Using the ChooserSelect the AJ-1800/2000 printer icon Basic Printing part Click the OK button in the Paper Settings dialog box To print a single copy of a document, confirm 1 Printing a Watermark How to Print a Watermark Automatic Zooming to the Loaded Paper Enlarge/Reduce the Printed Image Printing Multiple Pages on One Printing a Photograph Background Printing To Setup Background Printing When background printing is On When background printing is OffPrint Monitor Print Monitor Functions Maintenance Ink low error message is displayedTime to Change the Ink Tank Open the front cover Remove the old ink tank Changing Ink Tank part Properly align the tab when inserting Confirm the ink lamp is not blinking Check the result of the test Test Print HeadChange the print head Cleaning the Print Head Open the front cover Raise the print head latch Changing the Print Head part Lower the print head latch Removecase. the new print head from its protective To maintain print quality after changing the print Close the front coverHead, always align the print head Select a pattern sample for Pattern a Aligning the Print Head part Dialog box Click the OK button in the Align print head Keeping the Printer Clean Troubleshooting Identifying Printer Problems CHECK1 Is there too much paper in the paper tray? Paper is not Fed into the Printer partIs the loaded paper too thick or too thin? Trouble feeding stiff envelope or heavy Is the paper curled or folded? Is the printer on a flat surface?Paper tray? Close the jam cover, insert the output tray Paper JamPress the paper button Printer Inoperative CHECK1 Is the power cord connected?If all the lamps keep blinking Nothing Prints part CHECK10 Has the printer driver been installed properly? Restart your computer Select the item you want to delete in the box If the print output is faint or uneven Faint, Uneven or Smeared Print Output CHECK3 Is the paper loaded correctly? CHECK2 Is the orientation of document setting correct? Align the print head Driver.Specify the print quality setting in the printer CHECK1 Is the printer driver set to the color print option? Unit does not Print in Color Printing is too Slow Index Index