Sharp AJ2000 manual Click the OK button in the Align print head, Dialog box

Aligning the Print Head (part 2)

Maintenance

2 Select a pattern sample for "Pattern B".

Look at the chart B on your test chart. Select the number under the pattern sample, in which is located the closest to the center of the two horizontally parallel lines.

Example:

-6+8

-8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8

3 Select pattern samples for "Pattern C" and "Pattern D" respectively.

Look at the chart C and D on your test chart. Select the numbers under the pattern samples, which have the straightest lines.

6	Click the "OK" button in the "Align print head"
	dialog box.

The print head will align itself.

!If you cannot find any satisfactory pattern sample for each of "Pattern A" to "Pattern D" settings, select the best ones among the printed pattern samples, and then go back to step 3.

!The printer cannot perform other operations while aligning the print head.

Example:

Cracked line -6+1 Straight line

-6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6

				39
How to Use the	Printer Properties	Print	Maintenance	Troubleshooting
Online Manual