Sharp AL-1633, AL-1644 4

36

4Chapter 4

USER SETTINGS

This chapter explains how to set the automatic exposure level, toner s ave mode, and the user programs, which are

custom settings that control fine points of the machine’s operation.

ADJUSTING THE AUTOMATIC

EXPOSURE LEVEL

The exposure level used in automatic exposure adjustment, which autom atically adjusts the copy exposure

according to the original, can be adjusted. If copies tend to be too dark or to o light when automatic exposure

adjustment is used, follow the steps below to adjust the automatic exposure level.

The automatic exposure level can be adjusted separately for the document glass and the SPF.

1To adjust the automatic exposure

level in the SPF, place the original in

the SPF. (p.22)

Make sure that the SPF indicator is lit.

2Press the [AUTO/TEXT/PHOTO] key

( / / ) to select "PHOTO"

().

3Hold down the [AUTO/TEXT/PHOTO]

key ( / / ) until the AUTO

indicator ( ) blinks.

The exposure level

indicators show the

current setting.

4Press the [Light] key ( ) or [Dark]

key ( ) to lighten or darken the

automatic exposure level as desired.

5Press the [AUTO/TEXT/PHOTO] key

( / / ) to complete the

setting.

The AUTO indicator ( ) stops blinking and

lights steadily.

The copy, scanner and printer functions cannot be used while the automatic exposure level is being adjusted.

Note

To adjust the automatic exposure level fo r

copies made from originals placed on the

document glass, proceed to step 2.

Note

AUTO

AUTO

AUTO

AUTO

135

After adjusting the automatic exposure leve l,

it is recommended that you make a test copy

to check the new level.

135

135

AUTO

AUTO

Note

AL-1633_1644_EX.book 36 ページ２００３年１０月２３日　木曜日　午後８時２１分

Contents

Main AL-1633 AL-1644 Page CONTENTS 1 2 3 4 5 6 7 8 CAUTIONS CAUTIONS ON USING Do not install your machine in areas that are: Warning: Caution: CAUTIONS ON HANDLING Do not touch the surface (green portion) of the drum cartridge. CAUTIONS ON LASER Trademark acknowledgements ENVIRONMENTAL INFORMATION USING THE MANUAL ABOUT THE OPERATION MANUALS Operation Manual (Digital Multifunctional System) (this manual) Online Manual (on the accessory CD-ROM) Software Setup Guide (separate manual) CONVENTIONS USED IN THIS MANUAL SPF DIFFERENCES BETWEEN MODELS Warning MAIN FEATURES High-speed laser copying High-quality digital image Enhanced copying features Scan once/Print many 1 BEFORE USING THE MACHINE PART NAMES AND FUNCTIONS to are only on the SPF model. Warning OPERATION PANEL Page CHECKING PACKED COMPONENTS AND ACCESSORIES UNPACKING SET-UP 1 2 3 4 INSTALLING THE TD CARTRIDGE 1 2 3 4 POWER ON AND OFF POWER ON Turn the power switch to the "ON" position POWER OFF Power Save Modes LOADING PAPER PAPER Special papers LOADING PAPER Loading the paper tray 4 1 2 1 paper width. 2 3 the way into the bypass tray. CHANGING A TRAYS PAPER SIZE SETTING 1 key ( ) for more than 5 seconds to set the selected paper size. 2 3 4 5 2 COPY FUNCTIONS 2 NORMAL COPYING Copying from the document glass 1 been left on the document glass. Close the SPF. 2 of the original(s). 3 Auto paper select mode (Two-tray model only) Removing the document cover Copying books or originals with folds or creases Originals that can be used in the SPF Originals that cannot be used in the SPF MAKING A COPY DARKER OR LIGHTER Original types 1 ( / / ) to select the original type. 2 REDUCTION/ENLAREGMENT/ZOOM AUTOMATIC RATIO SELECTION 1 2 document glass, select the original size. (p.21) MANUAL RATIO SELECTION 1 If the original is placed on the document glass, select the original size. (p.21) 3 keys ( , ) and [Zoom] keys ( , ) to select the desired copy ratio. SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY (XY ZOOM copying) 1 2 3 6 7 8 TWO-SIDED COPYING USING THE BYPASS TRAY 1 2 3 without changing the position of the edge closest to you, insert it in the bypass tray. DUAL PAGE COPYING 1 2 3 4 5 INTERRUPTING A COPY RUN (Interrupt copying) 1 2 3 3 PRINTER/SCANNER FUNCTIONS USING THE PRINTER MODE BASIC PROCEDURE FOR PRINTING 1 USING THE SCANNER MODE SCANNING USING THE KEYS ON THE MACHINE 1 2 3 scanning. [SCAN MENU] keys and the Button Manager scan menu SCANNING FROM YOUR COMPUTER OPERATION IN COPY, PRINTER, AND SCANNER MODES 4 USER SETTINGS ADJUSTING THE AUTOMATIC EXPOSURE LEVEL 1 2 ENABLING TONER SAVE MODE 1 2 3 4 CUSTOMISING SETTINGS (User programs) USER PROGRAMS Page SELECTING A SETTING FOR A USER PROGRAM 1 the alarm indicators ( , , , ) blink. 2 numeric keys. SETTINGS FOR AUDITING MODE AUDITING MODE AUDITING MODE SETTINGS SELECTING AUDITING MODE SETTINGS 1 2 3 4 Auditing mode (program No.10) Account number entry (program No.11) Account number change 1 with the numeric keys. 2 the copy. 3 5 TROUBLESHOOTING TROUBLESHOOTING MACHINE/COPYING PROBLEMS PRINTING AND SCANNING PROBLEMS MACHINE/COPYING PROBLEMS Page Page PRINTING AND SCANNING PROBLEMS Page Page Removing the software 1 Click the "start" button, and then click "Control Panel". 2 3 the machine and Button Manager from the list, and remove the software. INDICATORS AND DISPLAY MESSAGES MISFEED REMOVAL MISFEED IN THE SPF (only on the SPF model) 1 Section A Section B MISFEED IN THE BYPASS TRAY 1Gently pull the misfed paper out. 2Open and close the side cover. MISFEED IN THE MACHINE 1 A. Misfeed in the paper feed area 2 3 1 2 3 4 5 1 2 3 MISFEED IN THE UPPER PAPER TRAY 1 and remove the misfed paper. 2 3 MISFEED IN THE LOWER PAPER TRAY (Two-tray model only) 5 1 2 REPLACING THE TD CARTRIDGE 1 2 3 4 REPLACING THE DRUM CARTRIDGE and open it. 1 cover. 2 5 6 7 8 6 ROUTINE MAINTENANCE CHECKING THE TOTAL OUTPUT COUNT CHECKING THE TOTAL OUTPUT COUNT [Total output count] CHECKING THE TONER LEVEL AND DRUM CARTRIDGE LIFE TONER LEVEL 1 3 DRUM CARTRIDGE LIFE ROUTINE MAINTENANCE CLEANING THE TRANSFER CHARGER 1 2 3 4 5 6 7 SUPPLIES STORAGE OF SUPPLIES SUPPLY PART NUMBERS Supply list MOVING INSTRUCTIONS 1 10 2 3 8 APPENDIX SPECIFICATIONS SPF (only on the SPF model) Specifications Printer Function Scanner Function SOFTWARE LICENSE Page INDEX