Sharp AL-1644, AL-1633 operation manual Selecting Auditing Mode Settings

USER SETTINGS

SELECTING AUDITING MODE SETTINGS

1 Hold down the [Light] key ( ) until

the alarm indicators ( , , , ) blink.

The display shows "- -" with the left hyphen blinking.

1 3 5

5 Press the [Light] key ( ) to complete the settings.

The alarm indicators ( , , , ) go off and the display returns to the number of copies display.

2 Enter the program number with the numeric keys.

• See "AUDITING MODE SETTINGS" (p.41) for the program numbers.

• The selected program number blinks.

• For example, to select "Auditing mode", enter "10".

If you enter the wrong number, press the

Note	[CLEAR] key (	) and then enter the correct
	number.

3 Press the [START] key ( ).

• The selected program number stops blinking and lights steadily.

• The currently selected setting code blinks on the right side of the display.

4 Enter the desired setting code for the program as explained in the detailed procedures on the following pages.

For the setting codes, see "AUDITING MODE SETTINGS". (p.41)

•	If you enter the wrong number, press the
Note	[CLEAR] key (	) and return to step 2.

•If "E" (error code) blinks in the first digit of

the display, press the [CLEAR] key ( ) and return to step 2.

42