TROUBLESHOOTING

 

 

Problem

 

Cause and solution

Page

 

 

 

 

 

 

 

 

The document glass or the underside of the document

 

 

 

 

cover/SPF is dirty.

66

Copies are smudged or dirty.

Clean regularly.

 

 

 

 

Original smudged or blotchy.

 

 

 

Use a clean original.

 

 

 

 

 

 

 

 

 

 

 

 

The scanner glass in the SPF is dirty.

66

White or black lines appear on

Clean the long, narrow glass in the SPF.

 

copies.

 

 

The transfer charger is dirty.

67

 

 

 

 

 

 

Clean the transfer charger.

 

 

 

 

 

 

 

 

 

 

 

 

Copying or printing is performed.

 

 

 

Set the paper size after copying or printing is complete.

 

 

 

 

 

 

 

 

 

Paper size for a paper tray cannot

The machine has stopped temporarily due to running out

 

of paper or a misfeed.

17, 54

be set.

 

 

 

 

Load paper or remove the misfeed, and then set the paper size.

 

 

 

 

 

 

 

 

 

 

 

 

 

An interrupt copy job is in progress.

31

 

 

 

Set the paper size after the interrupt copy job is finished.

 

 

 

 

 

 

 

 

 

 

 

 

The paper output tray is full.

 

 

 

 

Long copy runs are automatically paused every 250 copies.

25

A copy job stops before it is

 

Remove the copies in the paper output tray and press the

 

 

finished.

 

 

 

[START] key ( ) to resume copying.

 

 

 

 

The tray is out of paper.

17

 

 

 

Load paper.

 

 

 

 

 

 

 

 

 

 

 

 

Any other indicators are lit.

15

 

 

 

If other indicators are lit, the machine is in "Preheat mode". Press

The POWER SAVE indicator ( ) is

 

any key on the operation panel to resume normal operation.

 

 

 

 

The POWER SAVE indicator ( ) is only lit.

 

lit.

 

 

 

 

 

 

If only the POWER SAVE indicator ( ) is lit, the machine is in

15

 

 

 

 

auto power shut-off mode. Press the [START] key ( ) to

 

 

 

 

 

 

 

 

 

resume normal operation.

 

 

 

 

 

 

Any one of the alarm indicators

See "INDICATORS AND DISPLAY MESSAGES" to check

 

the meaning of the alarm indicator and error message in

53

( ,

,

, ) is lit or blinking.

the display, and take appropriate action.

 

 

 

 

 

 

 

 

 

The same power outlet is being used for the lighting

 

Lighting fixture flickers.

fixture and the machine.

Connect the machine to a power outlet which is not used for other

 

 

 

 

 

 

 

 

electric appliances.

 

 

 

 

 

 

 

48

Page 50
Image 50
Sharp AL-1644 Original smudged or blotchy, Copies Transfer charger is dirty, Copying or printing is performed, Finished