NORMAL COPYING

For photographs, select PHOTO ( ) and then adjust with the light

( ) and dark ( ) keys as desired.

There are 5 exposure steps indicated by 3 indicator lights. (The indicators light up one or two at a time.)

If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that level will light up simultaneously.

Set the number of copies using the two copy quantity

6 ( , ) keys.

Press the right copy quantity key to set the units digit from 0 to 9. This key will not change the tens digit.

Press the left copy quantity key to set the tens digit from 1 to 9.

A single copy can be made with the initial setting, i.e., when “0” is displayed.

Tens digit

Units digit

Press the CLEAR (

) key to clear an entry if a mistake is made.

 

7

Press the START (

) key.

 

The number in the copy quantity display will decrease by 1 each time

 

a copy is made.

 

 

 

Press the CLEAR (

) key to stop copying in the middle of a run.

 

To repeat the same copy sequence for a different original, simply

 

replace the original and press the START (

) key.

MAKING COPIES

Normal copying

19

Page 21
Image 21
Sharp AL-1650 operation manual Normal Copying