Set-Up, Install the TD cartridge | Sharp AL-1650 specs

SET-UP

GETTING STARTED

Set-up

Remove all pieces of tape, then open the document

1 feeder cover and remove the protective material.

Use a coin (or other suitable object) to remove the

2 screw.

Store the screw in the paper tray as described in step 6 because it must be used if the copier has to be moved. (p. 52)

3 Install the TD cartridge.

●For installation of the TD cartridge, see steps 1 and 2 and steps 4 to 7 of TD CARTRIDGE REPLACEMENT on pages 32 and 33.

4 Gently lift and pull out the paper tray until it stops.

5 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray.

11

Image 13

Sharp AL-1650 operation manual Set-Up, Install the TD cartridge, Gently lift and pull out the paper tray until it stops

Contents

AL-1650 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Original Size Enter key and indicators p AUTO/MANUAL/PHOTO / / key and indicators pPaper Size indicators Alarm indicators Light and dark keys and indicators Dual page Copy key and indicator pAuto Image key and indicator p @0 Preset Ratio selector keys and indicators p Do not install your copier in areas that are Copier Installation Getting Started Unpacking Checking Packed Components and Accessories SET-UP Install the TD cartridgeGently lift and pull out the paper tray until it stops SET-UP Turn the power switch on Load copy paperFront of the paper tray Store the pressure plate lock which has been removed Push the paper tray firmly back into the copier Loading Copy Paper Loading Copy Paper Press the Start key and then the Paper Size 11ENTER key Turn the power switch on Using the SPFAdjust the copy density Normal Copying Stream feeding mode Set the number of copies using the two copy quantity KeysNormal Copying Press the Start key Using the original table Normal Copying Automatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image Key Enter the number of copies Press the Start key Manual REDUCTION/ENLARGEMENT/ZOOM Unfold the bypass tray Bypass Feed special paper Press the Tray Select key to select the bypass Bypass Feed special paper TWO-SIDED Copying Press the XY-ZOOM key XY ZoomPress the copy ratio display Key Set the number of copies and press the Start key XY Zoom Press the B/W Reverse key Check the copy paper size Reverse Press the Dual page Copy key Dual page Copy Press the Interrupt key Interrupting a Copy RUNStart key to resume copying Replace the original for the interrupted job and press Automatic Exposure Adjustment Press the AUTO/MANUAL/PHOTO Key To select the Manual Mode Toner Save ModeTo enter the toner save mode, press the light key Genuine Supplies TD Cartridge Replacement TD Cartridge Replacement Cartridge out until the green strap handle can be grasped To remove itBy the right hand. Lift the cartridge by the handle while Gently install the TD cartridge. To install the TD cartridge Drum Cartridge Replacement Misfeed in the SPF Misfeed RemovalFirst confirm the misfeed location Right feeding roller cover and remove the misfed Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier Gently pull the misfed paper out Removing it Fusing unit is hot. Take care in removing paperPush gently the right side of the front cover to open Cover On either side of the guide and remove the misfed paper Open the paper guide by pressing down the projection Misfeed in the lower paper tray Misfeed in the upper paper trayClose the side cover by pressing the handle on the cover Remove the misfed paper Enter a program number using the left copy quantity Key Setting the user programsUser Programs List of user programs User Programs Select the desired parameter using the right copy quantity Preheat mode Power Save ModesAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Original table and document feeder cover User MaintenanceBypass tray paper feed roller Transfer charger Charger cleaner out by holding the tab User MaintenanceGently lift and pull out the upper paper tray and take Copier TROUBLE? Problem Solution Copier TROUBLE? Self-diagnostic functionExample Types and sizes of copy paper SuppliesSupply part numbers Supply list Genuine supplies statement SuppliesProper storage Store copy paper in the wrapper and lying flat Moving Instructions Turn the power switch off and disconnect the power CordPush the paper tray back into the copier Copier Specifications Single Pass Feeder Specifications Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable Limits Other Limits Ingredients CAS No ProportionHealth Hazards None required under normal use Memo Memo Page Sharp Corporation