USER PROGRAMS
Press the START ( 
) key.
3 ● The entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side.
4 Select the desired parameter using the right copy quantity
( 
) key.
● The entered parameter number will blink on the right side of the copy quantity display.
●The parameters are shown in the table below.
For example, to change the setting of the auto power
Program name | Parameters |
|
|
|
|
Auto clear time | 0 e OFF | 1 e 30 sec. | * 2 e 60 sec. | 3 e 90 sec. | 4 e 120 sec. |
| 5 e 10 sec. |
|
|
|
|
|
|
|
|
|
|
Preheat mode | 0 e OFF | 1 e 30 sec. | 2 e 60 sec. | * 3 e 90 sec. | 4 e 120 sec. |
|
|
|
|
|
|
Auto power | * 1 e 30 min. | 2 e 60 min. | 3 e 90 min. | 4 e 120 min. | 5 e 240 min. |
|
|
|
|
|
|
Stream feeding mode | * 0 e OFF | 1 e ON |
|
|
|
|
|
|
|
|
|
Auto power | 0 e OFF | * 1 e ON |
|
|
|
|
|
|
|
|
|
Auto paper select mode | 0 e OFF | * 1 e ON |
|
|
|
Auto tray switching | 0 e OFF | * 1 e ON |
|
|
|
Factory default settings are indicated with an asterisk (*).
If you select “0” (OFF) in a program, the corresponding function will be disabled.
5 | Press the START ( | ) key. |
● The | ||
and the entered value will be stored.
To continue with other user programs, press the CLEAR
6 ( 
) key and then repeat steps 2 to 5. To exit the user
program mode, press the light ( 
) key.
●All the alarm indicators will go out.
User programsGENERAL INFORMATION
43
