User programs
GENERAL INFORMATION
USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
|
| List of user programs |
|
| This copier has the following user programs. |
|
|
|
Program No. | Program name | Description |
|
|
|
1 | Auto clear time | Sets the auto clear time. The copier returns to the initial settings when |
|
|
|
|
| the auto clear time elapses after the last copy is made. |
|
|
|
2 | Preheat mode | Sets the time that elapses before the copier enters the preheat mode after |
|
| any operation is made. See page 44. |
|
|
|
3 | Auto power | Sets the time that elapses before the copier enters the auto power |
| timer | mode after any operation is made. See page 44. |
|
|
|
4 | Stream feeding mode | Enables or disables the stream feeding mode. For description of the stream |
|
| feeding mode, see page 17. |
|
|
|
5 | Auto power | Enables or disables the auto power |
| setting |
|
|
|
|
8 | Auto paper select mode | Enables or disables the auto paper selection. See page 16. |
|
|
|
9 | Auto tray switching | Enables or disables the automatic tray switching which occurs when paper |
|
| in a tray runs out. (This switching cannot switch to the bypass tray.) |
|
|
|
Setting the user programs
Press and hold the light ( 
) key for more than 5
1 seconds until all the alarm indicators ( 
, 
, 
, and 
) blink and “–
Enter a program number using the left copy quantity
2 ( 
) key.
● The selected program number will blink in the copy quantity display.
●If a mistake is made in steps 2 to 4, press the CLEAR ( 
) key. The copier will return to step 2.
● The program numbers are shown in the table above.
For example, to change the setting of the auto power
42
