Misfeed in the upper paper tray

MISFEED REMOVAL

3	Close the side cover by pressing the handle on the cover.
	●	The misfeed ( ) indicator will go out.

STATUS INDICATORS Misfeed removal

Before opening the paper tray, be sure to open the bypass tray, lift slightly on the side cover and slide the cover out until it stops, and then perform steps 1 to 3 described in the “A. Misfeed in the paper feed area” section.

Gently lift and pull out the paper tray and remove the

1 misfed paper.

2 Close the paper tray.

Lift slightly on the side cover and slide the cover out until

3 it stops. Close the side cover by pressing the handle on the cover.

●The misfeed ( ) indicator will go out.

Misfeed in the lower paper tray

Grasp the handle of the lower side cover and gently open

1 the cover.

Page 42

Image 42

Sharp AL-1650 operation manual Misfeed in the upper paper tray, Misfeed in the lower paper tray

Contents

AL-1650 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Paper Size indicators AUTO/MANUAL/PHOTO / / key and indicators pOriginal Size Enter key and indicators p Alarm indicators Auto Image key and indicator p Dual page Copy key and indicator pLight and dark keys and indicators @0 Preset Ratio selector keys and indicators p Copier Installation Do not install your copier in areas that are Getting Started Checking Packed Components and Accessories Unpacking Install the TD cartridge SET-UPGently lift and pull out the paper tray until it stops Front of the paper tray Turn the power switch on Load copy paperSET-UP Store the pressure plate lock which has been removed Loading Copy Paper Push the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size 11ENTER key Adjust the copy density Using the SPFTurn the power switch on Normal Copying Normal Copying Set the number of copies using the two copy quantity KeysStream feeding mode Press the Start key Using the original table Normal Copying Press the Auto Image Key REDUCTION/ENLARGEMENT/ZOOMAutomatic Enter the number of copies Press the Start key REDUCTION/ENLARGEMENT/ZOOM Manual Bypass Feed special paper Unfold the bypass tray Bypass Feed special paper Press the Tray Select key to select the bypass TWO-SIDED Copying XY Zoom Press the XY-ZOOM keyPress the copy ratio display Key XY Zoom Set the number of copies and press the Start key Reverse Press the B/W Reverse key Check the copy paper size Dual page Copy Press the Dual page Copy key Start key to resume copying Interrupting a Copy RUNPress the Interrupt key Replace the original for the interrupted job and press Automatic Exposure Adjustment Toner Save Mode Press the AUTO/MANUAL/PHOTO Key To select the Manual ModeTo enter the toner save mode, press the light key TD Cartridge Replacement Genuine Supplies TD Cartridge Replacement To remove it Cartridge out until the green strap handle can be graspedBy the right hand. Lift the cartridge by the handle while Drum Cartridge Replacement Gently install the TD cartridge. To install the TD cartridge First confirm the misfeed location Misfeed RemovalMisfeed in the SPF Right feeding roller cover and remove the misfed Misfeed in the copier Misfeed RemovalMisfeed in the bypass tray Gently pull the misfed paper out Fusing unit is hot. Take care in removing paper Removing itPush gently the right side of the front cover to open Cover Open the paper guide by pressing down the projection On either side of the guide and remove the misfed paper Misfeed in the upper paper tray Misfeed in the lower paper trayClose the side cover by pressing the handle on the cover Remove the misfed paper User Programs Setting the user programsEnter a program number using the left copy quantity Key List of user programs Select the desired parameter using the right copy quantity User Programs Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Bypass tray paper feed roller User MaintenanceOriginal table and document feeder cover Transfer charger User Maintenance Charger cleaner out by holding the tabGently lift and pull out the upper paper tray and take Problem Solution Copier TROUBLE? Self-diagnostic function Copier TROUBLE?Example Supply part numbers SuppliesTypes and sizes of copy paper Supply list Proper storage SuppliesGenuine supplies statement Store copy paper in the wrapper and lying flat Turn the power switch off and disconnect the power Cord Moving InstructionsPush the paper tray back into the copier Specifications Copier Specifications Single Pass Feeder Index Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable Limits Ingredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Memo Memo Page Sharp Corporation