Sharp AL-1650 2, 3, 2, 1, 4

39

STATUS INDICATORS

MISFEED REMOVAL

Misfeed removal

Roller rotating knob

Fusing unit release lever

2Turn the roller rotating knob in the direction of the

arrow.

3Carefully remove the misfed paper. Lower the fusing

unit release levers to allow easier removal. Return the

release levers to their operating positions.

The fusing unit is hot. Take care in removing paper.

●Do not touch the surface of the drum (green portion)

of the drum cartridge when removing the misfed

paper. Doing so may damage the drum and cause

smudges on copies.

●Be careful about unfixed toner on the misfed paper

not to soil your hands or clothes.

4Close the front cover by pushing both sides with your

hands and then close the side cover by pressing the

handle on the cover.

●The misfeed ( ) indicator will go out.

When closing the covers, be sure to close the front

cover securely and then close the side cover. If the

covers are closed in the wrong order, the covers may

be damaged.

C. Misfeed in the transport area

1Open the paper guide by pressing down the projection

on either side of the guide and remove the misfed paper.

The fusing unit is hot. Take care in removing paper.

2If the misfed paper cannot be removed by the previous

step but is visible in the paper output area, remove the

paper by pulling it into the paper output area.

Contents

Main AL-1650 FOR YOUR PROTECTION... 1 CONTENTS GETTING STARTED MAKING COPIES STATUS INDICATORS GENERAL INFORMATION CAUTIONS SAFETY PRECAUTIONS MAIN FEATURES PART NAMES AND FUNCTIONS Overall layout Page Operation panel e Page COPIER INSTALLATION CAUTIONS ON HANDLING CHECKING PACKED COMPONENTS AND ACCESSORIES Unpacking Page SET-UP 6 in step 5 and the screw which has been removed in step 2 in the front of the paper tray. 7 position. Plug the power cord into the nearest outlet. 8 9 1 2 3 the edges go under the corner hooks. 4 LOADING COPY PAPER Page 8 9 11 10 LOADING COPY PAPER NORMAL COPYING Using the SPF 1 2 3 4 5 6 ( , ) keys. 7 Using the original table 1 2 5 align it with the original size scale. 3 4 6 ( , ) keys. 7 REDUCTION/ENLARGEMENT/ZOOM Automatic 3 2 4 2 original table. 3 zoom ( , ) keys to select the desired copy ratio. the paper tray. 1 2 3 the bypass tray. BYPASS FEED (special paper) Page Page XY ZOOM 2 3 4 XY ZOOM 5 6 7 8 Page 1 2 3 DUAL PAGE COPY Page 1 2 3 4 AUTOMATIC EXPOSURE ADJUSTMENT TONER SAVE MODE 1 2 3 4 2 3 4 TD CARTRIDGE REPLACEMENT GENUINE SUPPLIES 5 6 7 2 3 4 DRUM CARTRIDGE REPLACEMENT GENUINE SUPPLIES 5 6 8 7 MISFEED REMOVAL Misfeed in the SPF 2 1 3 4 Misfeed in the bypass tray 1 2 Misfeed in the copier 2 A. Misfeed in the paper feed area 3 2 1 B. Misfeed in the fusing area 2 3 2 1 4 C. Misfeed in the transport area Page Page USER PROGRAMS List of user programs 2 1 Setting the user programs 3 4 6 () key. USER PROGRAMS POWER SAVE MODES Setting the power save modes POWER SAVE MODES Copying from the preheat mode Make desired copier selections and press the START () key using the normal copying procedure. USER MAINTENANCE Original table and document feeder cover Transfer charger Bypass tray paper feed roller Page Problem Solution COPIER TROUBLE? Self-diagnostic function Problem Solution COPIER TROUBLE? SUPPLIES Types and sizes of copy paper Supply part numbers SUPPLIES Genuine supplies statement GENUINE SUPPLIES Proper storage 1. Store the supplies in a location that is: 2. Store copy paper in the wrapper and lying flat. Page SPECIFICATIONS COPIER SPECIFICATIONS SINGLE PASS FEEDER INDEX INDEX 57 SHARP MATERIAL SAFETY DA T A SHEET Section 1. Product Identification Section 2. Suppliers Name and Address Section 6. Physical Chemical Characteristics Section 7. Fire and Explosion Data Section 8. Reactivity Data Section 9. Precautions for Safe Handling and Use Section 10. Regulatory Information 59 SHARP MATERIAL SAFETY DA T A SHEET Section 1. Product Identification Section 2. Suppliers Name and Address Section 6. Physical Chemical Characteristics Section 7. Fire and Explosion Data Section 8. Reactivity Data Section 9. Precautions for Safe Handling and Use Section 10. Regulatory Information Page Page WARNING: