Sharp AL-1650 operation manual TWO-SIDED Copying

TWO-SIDED COPYING

Two-sided copies can be made on this copier using the bypass tray.

MAKING COPIES Two-sided copying

Place the first original on the original table and make a

1 copy.

●The first copy can be made using any of the paper feed stations.

Replace the first original with the second original and

2 close the document feeder cover.

●Make sure that the first and second originals are oriented in the same way on the original table.

●When the originals are placed horizontally, make sure that the first and second originals are oriented in the reverse way on the original table.

Both the first and second originals can be set in the SPF but they must be set separately. If the stream feeding mode for the SPF has been enabled, set the second original after the SPF () indicator goes out. See page 17.

3

4

5

Turn the first copy over left to right and place it into the bypass tray.

●Be sure to feed the copies one sheet at a time.

Use the TRAY SELECT ( ) key to select the bypass tray.

Press the START ( ) key.

24