Miele 10 102 470 installation instructions Installing the oven, Before installation, Building in

Installing the oven

￿The oven must not be operated until it has been correctly installed in its housing unit.

In order to function correctly, the oven requires an adequate supply of cool air. Ensure that the supply of cool air is not impaired (e.g. by heat insulation strips in the housing unit). Please also ensure that the cool air supply is not unduly heated by other heat sources such as a wood burning stove.

￿Push the oven into the housing unit and align it.

￿Open the door (if you have not removed it previously).

Before installation

￿Before connecting the appliance to the mains, you must disconnect the power supply to the isolator switch.

Building in

￿Connect the mains cable from the oven to the isolator.

Lifting the oven by the door handle can damage the door. Use the handle recesses on the side of the casing.

It is advisable to dismantle the door before installing the appliance (see "Cleaning and Care - Dismantling the door") and remove accessories from the oven cavity. This will make it easier to install in its niche and you will not be tempted into using the handle to carry it.

￿Use the screws supplied to secure the oven to the side walls of the housing unit through the holes in the oven trim.

￿Refit the door, if necessary (see "Cleaning and care - Refitting the door").

95